Starting / Stopping the Engine
Positions of Master Control Lever
2011BA042 KN
Stop 0 – engine off – the ignition is switched off
Normal run position (F) – engine runs or can fire.
Starting throttle n– for starting the engine
Positions of Choke Shutter
2011BA043 KN
Choke shutter closed l– for starting the engine
Select this position:
–if the engine is cold
–If the engine stalls when you open the throttle after starting.
–If the fuel tank was run until empty (engine stopped).
Choke shutter open l– for starting the engine
Select this position:
–If the engine is warm, i.e. if it has been running for about one minute.
–when the engine begins to fire.
–after clearing a flooded combustion chamber.
Setting the Master Control Lever
To move the Master Control lever from the normal run position (F) to starting throttle (n), press down the throttle trigger lockout and squeeze the throttle trigger at the same time and hold them in that position – now set the Master Control lever.
English
The Master Control lever moves from the starting throttle position (n) to the run position (F) when you press down the throttle trigger lockout and blip the throttle trigger at the same time.
To switch off the engine, move the Master Control lever to Stop (0).
Fuel pump
The fuel pump bulb must be pressed:
–When starting for the first time.
–If the fuel tank was run until empty (engine stopped).
MS 150 TC | 27 |