STIHL MS 150 TC Maintenance and Care

English

The following maintenance intervals apply for normal operating conditions only. If your daily working			after finishing work or daily
time is longer or operating conditions are difficult (very dusty work area, resin-rich wood, tropical				after each refueling stop
wood, etc.), shorten the specified intervals accordingly. If you only use the saw occasionally, extend
the intervals accordingly.		before starting work
		before starting work			weekly	monthly	every 12 months	if problem	if damaged	if required

Complete machine	Visual inspection (condition, leaks)	X		X

	Clean		X
	Clean		X

Throttle trigger, trigger lockout, choke lever, stop
switch, Master Control lever (depending on	Check operation	X		X
version)

Chain brake	Check operation	X		X

	Have checked by dealer1)									X
	Have checked by dealer1)									X
	Check					X

Pickup body/filter in fuel tank	Clean, replace filter element					X		X

	Replace						X		X	X

Fuel tank	Clean					X

Chain oil tank	Clean					X

Chain lubrication	Check	X

	Inspect, also check sharpness	X		X

Saw chain	Check chain tension	X		X

	Sharpen									X

	Check (wear, damage)	X

Guide bar	Clean and turn over									X

	Deburr				X
	Deburr				X

	Replace								X	X

Chain sprocket	Check				X

Air filter	Clean							X		X

	Replace								X
	Replace								X

Antivibration elements	Check	X						X

	Have replaced by dealer1)								X
	Have replaced by dealer1)								X

MS 150 TC