INSTALLATION INSTRUCTIONS
INSTALLATION
23
AR1965
4.5• Loosen the two screws retaining the plate beneath the burner
The front of the plate can now be lifted off the screws:
• Pull it forward and remove, Diagram 24
24
AR1966
4.6• Remove the three screws retaining the rear back panel
• Lift and pull forward off the slotted brackets
25
AR1966
4.7With the appliance on its back:
• Remove the three wing nuts and screws retaining the loose box, Diagram 26.
26
AR1967
•Move the box forward to release the rear off the studs
•Tilt the front edge of the box upwards and remove from the appliance
4.8METHOD 1 - FRAME
•Fit the four frame fixing brackets through the rear of the flanges.
•Attach the foam seal around the rear of the flange,
Diagram 27
27
AR1913
•Fit the main firebox into the aperture and secure with the screws and rawl plugs provided through the top and bottom flanges, Diagram 28
28
AR1913
18