PART 1 • English
2.Use the UP/DOWN keys on your Remote control, select the language in which you want your menu to be displayed and press OK. The screen of the menu will now change to the language of your choice, and the menu option “Channel Set- Up” will appear on your screen.
3.You will see the “Channel
4.You will see two signal bar fields at the right lower part of your screen, showing Signal strength and signal quality.
5.Leave the satellite receiver in this menu and start with the alignment of your dish. The ASTRA satellite is located at 19.2° East. Find with a compass what is North and South, keep the Compass in your hand and turn your position until South is in front of your face. Now turn 19 Degrees to he left, this is roughly the- position where the Astra satellite must be found.
6.Now slowly move your dish to the left or to the right , make small steps to allow the (green) signal bars to display the signal level. Note that you will not see any green bars until you have aimed your dish to the ASTRA satellite correctly.
If you can not find the signal by turning Left or Right, then increase or decrease the vertical angle of you dish and again turn Left and Right. Repeat these steps until you see the Green signal bars appearing.
7.Once you see the bars, try to optimize the Level and Quality bars my making very small movements with the dish in Left, Right, Upper or Lower direction. Once you are convinced that you have the optimal signal strength, firmly fix you dish on that position.
8.Now you are ready to search the satellite and scan the available channels, you have different options to scan, we recommend you to the keep the settings in the menu as they are. Just press the RED (Automatic) button on your remote control to start the automatic scan. All channels will be found automatically, and once the search is completed the found channels will be stored in a logical order.
15
