Strong Enterprises SRT 6850 manual Trouble Shooting, Symptoms Cause

PART 1 • English

A.1 Trouble Shooting

Occasionally receivers can hang-up (just like a PC) so you are recommended to reset the receiver by disconnecting it from mains power. Wait 30 seconds and connect to mains power again and now check if the unit is working as expected. If the receiver does not work properly after checking the trouble shooting section, please contact the dealer. Don't open the receiver cover, it may cause an electrical shock due to high current voltage and the warranty of your receiver will be void if the receiver has been opened.

Symptoms Cause Solution

The green/red lights on front panel do not light up

No picture and sound

No picture and sound

The power cord is not plugged in

TV is set to wrong channel

Check that the power cord is plugged into the wall outlet

Check if the TV is switched on and set your TV to the correct EXT / AV or UHF channel

Problem in cable	Check if the scart and/or RF cable is
connections between	connected correctly to the TV and to the
No picture and sound receiver and TV	back of the receiver
Receiver “hang-up”	Disconnect the main power cord of the
	receiver from the 220V main power.
No sound	Reapply the power and “Reset” from the
	menu. Retuning as if for the first time
The receiver or TV is	Press the MUTE button on the remote
in “MUTE” mode	control unit of your receiver and TV

40