state when talkback began, once talk- back activity ends that state will resume; the main output will again be in its on (“latched”) state.
Talkback 1 Button and LED Indicator
The button in the center, factory labeled TALKBACK 1, controls the function(s) as- sociated with talkback 1. The manner in which the button functions depends on the way it was configured. An LED indi- cator, green in color, is located directly above the button. It lights whenever talk- back 1 is active. If the talkback 1 function mode has been configured for disabled, it will light only if the auxiliary relay has been assigned to follow the talkback 1 button. If the Model 233 has been selected to the
Talkback 1 Button Modes
•Push to talk: If this mode is selected the function(s) associated with the talkback 1 button is normally off. The function(s) will become active whenever the button is pressed and held.
•Hybrid: This mode is a combination of push to talk and alternate action. If the button is pressed and held, the function(s) associated with the talkback 1 button will become active until the button is released. If the button is mo- mentarily “tapped” the function(s) will change state. Upon Model 233 power up talkback 1 will be in its off state.
Talkback 2 Button and LED Indicator
The button on the right, factory labeled TALKBACK 2, controls the function(s) associated with talkback 2. The manner in which the button functions depends on
how it was configured. An LED indicator, green in color, is located directly above the button. It lights whenever talkback 2 is active. If the talkback 2 function mode has been configured for disabled, it will light only if the auxiliary relay has been assigned to follow the talkback 2 button. If the Model 233 is selected to the
Talkback Output 2 Button Modes
•Push to talk: If this mode is selected the function(s) associated with the talkback 2 button is normally off. The function(s) will become active whenever the button is pressed and held.
•Hybrid: This mode is a combination of push to talk and alternate action. If the button is pressed and held, the function(s) associated with the talkback 2 button will become active until the button is released. If the button is mo- mentarily “tapped” the function(s) will change state. Upon Model 233 power up talkback 2 will be in its off state.
Headphone Output Level Controls
Three rotary controls (“pots”) are located on the Model 233’s front panel and are associated with the stereo headphone output. The manner in which the controls function depend on the selected con- figuration. The control on the far right is associated with the sidetone function. It’s operation will be discussed in a later section. One configuration parameter sets the control on the far left and the control in the center to operate in a level/level or a level/balance mode. Another parameter allows the left/right assignment of the
Issue 1, September 2007 | Model 233 User Guide |
Page 30 | Studio Technologies, Inc. |
