Subaru Robin Power Products EY33-2, EY44-2 manual 13CRANKSHAFT -3-13

5 ) Check if connecting rod moves smoothly after reassembly.

Clamping torque of connecting rod cap is 250-300 kg-cm (1 8-21.7 ft-lbs).

D (crankshaft pin Dia.)

W(crankshaftpin Width)

PISTON TO CYLINDER AT PISTON SKIRT THRUST FACE (CLEALANCE)

	TOP RING
	SECOND RING
PISTON RING GAP (CLEARANCE)	O I L RING
	SKIRT R I N G
	TOP RING
PISTON RING SIDE CLEARNACE IN
GROOVES (CLEARANCE)
	SKIRT RING

CONNECTING ROD TO CRANK PIN (CLEARANCE)

t CONNECTING ROD TO PISTON PIN (CLEARANCE)

PISTON PIN TO PISTON (CLEARANCE)

6-3-13CRANKSHAFT (Fig.6-3-13)

1)Removeflywheelwoodrufkey.

2 ) Pullcrankshaft outfromopenend of crankcaseand take care not to damage the oil seal.

If necessary, loosen shaft by tapping lightly at flywheel end with a soft hammer.

Fig. 6-37-3

0.15OL-0.189L	0.155L-0.177L
(.0059”L-.0074”L)	(.0061“L-.0070”L)
0.05L-0.25L	0.05L-0.25L
(.0020”L-.0098“L)	(.0020”L-.0098”L)
0.2L-0.4L	0.3L-0.5L
(.0079”L-.0157”L)	(.0118”L-.0197”L)
0.031-0.07L	0.03L-0.07 L
(.0012”L-.0028”L)	(.0012”L-.0028”L)
0.08OL-0.112L	0.04OL-0.107L
(.0031”L-.0044”L)	(.0016“L-.0042”)
0.2L-0.5L	0.2L-0.5L
(.0079”L-.0197”L)	(.0079”L-.0197”L)
0.027L-0.046L	0.025L-0.047L
(.001 1”L-.OO18“L)	(.0010”L-.0019”L)
0.009T-0.010L	0.01 1T-0.07 1 L
(.00035”T-.00039”L)	(.0004”T--.0004”L)

Fig. 6-372-

-1 7-