12. CHECKS and CORRECTIONS
Afterdismantlingandcleaning the engineparts,checkthem,and if necessary,correctthem,accordingtothecorrection
table.
Thecorrectiontableapplieswhenevertheenginesarerepaired.Itscontentsshouldbethoroughlyunderstoodby those
whoundertaketherepairing.Itsspecificationsmustbeabidedbytoeffectcorrectmaintenance.
Below, terms employed in the correction table are explained.
CORRECTION
All operationsperformed on the enginepartsforthepurpose of improvingorrecoveringtheengineperformance, consisting of repair, readjustment, and replacement.
STANDARD SIZE
Design dimension of the part without the tolerance.
CORRECTION TOLERANCE
Tolerance on the
CORRECTION LIMIT
Limit onthepartandadjustment,beyondwhichanydimensionalandfunctionalchange,duetowear,burnand other causes will adversely affect the normal engine performance.
USE LIMIT
Limit, beyond which the part is no longer usable, due to defects m function or strength.
All dimensions in the CORRECTION TABLE are give in millimeter, except where otherwise specified.
