(5)DC CIRCUIT BREAKER

Check that there is continuity between the two terminals of DC circuit breaker when its push button is pressed.

(6)FLOAT TYPE OIL SENSOR

Check the oil sensor when it is installed on the engine. Check that sufficient engine oil is filled in the crankcase. Check that there is continuity between the lead wire of oil sensor and the ground (engine crankcase) when the oil level is above the minimum level mark of oil gauge.

Check that there is no continuity as above when the oil level is below the minimum level mark of oil gauge.

Oil sensor

– 21 –

Page 24
Image 24
Subaru Robin Power Products RG3200IS, RG2800IS, RG4300IS service manual DC Circuit Breaker, Float Type OIL Sensor