Subaru Robin Power Products RG3200IS, RG2800IS, RG4300IS service manual Assembly procedure

Caution:

Please wear protective goggles before starting assembly.

2) Assembly procedure

(1)Assemble the reel into the case. -1 Apply grease to the case.

-2 Properly orient the inner end of the spring installed in the reel.

-3 Hold the reel so that the shaft and hook part can be caught on the inner end of the spring, and softly drop into the case from the top.

-4 Move the reel gently in the counter-clockwise direction, making sure that the spring catches.

	Reel
Hooking	Spiral
position
	spring
Inner end of
the spring

Starter case

Grease

(2) Install the ratchet and friction spring.

Install the ratchet and friction spring into the reel.

Retaining-ring C

Friction plate

Ratchet

Friction spring

(3)Installation of friction plate and retaining ring C. Install by putting the Tab of friction plate into the hole of the ratchet.

Fasten with the retaining ring C.

Be sure that the retaining ring is fitted into the grooves.

Friction plate

Retaining-ring C

– 51 –