Subaru Robin Power Products RG4300IS, RG3200IS, RG2800IS Disassembly is completed

(2) Remove the small parts.

-1 Hold the case, and remove the retaining-ring C with the ring pliers.

-2 Beginning at the top, remove the retaining-ring, friction plate, and ratchet.

(3) Remove the reel.

-1 Move the reel to left and right at a 1/4 turns several times until it moves smoothly, gently holding it down.

-2 Slowly lift the reel, removing it from the case.

-3 Repeat (3) 1 and (3) 2 if the spring assembled in the reel sticks out.

Caution :

The reel is disassembled with the spring still

assembled, so place it on a flat table without

dropping, or shaking.

Disassembly is completed.

Retaining-ring pliers

Retaining-ring C

Retaining-ring C

Friction plate

Ratchet

Friction	Starter handle
spring

Reel

Spiral spring

Starter case

– 50 –