5-4-24 REAR COVER (UPPER) and

MUFFLER COVER (REAR)

(1) Attach the Rear Cover (Upper) first to the frame.

(2)Install the Muffler Cover (Rear) onto the Rear Cover (Upper) and the frame.

M6 x 18mm Flange bolt : 6pcs.

Tightening torque : 4.0-6.0

Nm

40-60

kgfcm

(3.0-4.4

ftlbs)

 

 

5-4-25 CONTROL PANEL and INVERTER UNIT

(1)Assemble the Bracket (Cover) to the inverter unit. M6 x 18mm Flange bolt : 2 pcs.

M6 x 25mm Flange bolt : 1 pce. (for right side of

the inverter unit)

Tightening torque : 4.0-6.0 Nm

40-60 kgfcm

(3.0-4.4 ftlbs)

(2)Assemble the Front Cover (Lower) below the Front Cover (Upper)

M6 x 18mm Flange bolt : 2 pcs.

(3)Attach the Front Cover (Upper). M6 x 18mm Screw : 4 pcs.

Tightening torque : 4.0-6.0 Nm

40-60 kgfcm

(3.0-4.4 ftlbs)

Rear cover (Upper )

Muffler cover

(Rear)

– 46 –

Page 49
Image 49
Subaru Robin Power Products RG3200IS, RG2800IS, RG4300IS service manual Rear Cover Upper, Muffler Cover Rear