(3) Remove the fuel strainer.
[ For electric start models ]
(4)Remove the battery cover and disconnect battery cables.
(5)Remove the battery from frame.
5-3-4 GROUNDING WIRE
Remove the grounding wire at the right bottom side of
control panel.
M6 Nut : 1pce.
5-3-5 CHOKE WIRE
Loosen the screw that fixes the choke wire to carburetor choke lever.
Turn the engine switch to “CHOKE” position to disconnect the choke wire from the choke lever.
Tools : Screw driver
5-3-6 CONTROL PANEL and INVERTER UNIT
(1)Loosen the four screws and remove the upper front cover.
M6 x 18mm Screw : 4pcs.
(2)Loosen the two bolts and remove the lower front cover.
M6 x 18mm Flange bolt : 2pcs.
Tools : Screw driver
Fuel |
strainer |
Battery |
cables |
Choke wire
– 24 –
