Subaru Robin Power Products RGX240D, RGX180 manual aOnly two slip rings

The RG Series 1sthe revolving armature type. and the RGX Series is the revolving field tk-pe. The differences between these types and then features are described below. The constructron of the revolving armature t>-peis shoxn in Fig. 5 -15. and that of the revolvmg field type in Fig. 5 -16.

The basic operating principle of the generator is this. As a conductor moves in a magnetic flus (between poles S and S of a magnet). a voltage is generated in the conductor and can be taken out as electric power. Generally. an electromagnet is used for generators. The ele.ztromagnet consists of poles and field coils wound around them, and the poles become magnets as a direct current runs through the field coils. The revolvtig armature type has static poles and a revolving armature which con- sists ot‘ a conductor for taking electric power out. The revolution of the armature generates a voltage.

It was earlier explained that a conductor moves in a magnetic flux. Actually, howev-er. a relative speed between the two is sufficient for generating a voltage. That is. a voltage can also be generated bl- rotating the magnet while keeping the con- ductor still.

The revolving field type falls in the latter categor!-: The pole serving as an electromagnet rotates. and armature ivhich con- sists of a conductor remains still.

The features of the revolving field type are as follows:

a)Only two slip rings

AS generator applications diversified! it became necessary for generators to meet increasingly varied conditions involv- ing XC output. DC output, dual voltage, three-phase, and usefulness with induction motors. Accordingly. AC windings. DC windings. auxiliary windings, etc. became necessary for generators. Becausethe revolving armature type takes elec- rric power from the revolving part. it requrres as many slip rings as the number of winding output termmals. and this increases the generator dimensions. The revolving field type is small in size becauseit requires only two slip rings <or feeding a current to operate the electromagnet.

b)Easy maintenance

As man)- brushes as the number of slip rings are necessary. The revolving field type is easier to maintain than the re-

volving armature type becauseit has fewer slip rings and brushes than the latter. Cl Lightweight

The revolving armature type is heavT because it requires yokes to fix the poles and serve as tlus passage.The revolving field type is light in %-eightbecause the stator and rotor can be made by laminating steel sheets of the samematerial.

- 20 -