2 I Attach the connector to the brush holder. Connect the green lead to the stator side and the brown lead to the bearing side.
Ficr.
3)Install the brush cover.
49 x 10 mm screw . . 3 pcs.
1I The frame has holes for the rubber mount locks. Hold the rubber mounts so their locks are in line with the ho!es. and tighten the nuts on the bottom of the frame. (See Fig.
8~ nut . .4 pcs.
8Qspring washer
GREEN WIRE
FRAME UPPER
Fig.
NOTE: The rubber mounts are so selected as to assure optimum vibration depending on model and frequency. Be sure to use the rgbber mounts of the correct parts number. Rubber mounts may appear the same in shape but differ in hardness. Especially, models RGX780, RGX240. and RGX240D use diagonal support rubber mounts.