Subaru Robin Power Products RGX240D, RGX180 manual Match the faucet joint. and tighten the bolts

10-3 HOW TO REASSEMBLE

10-3-l FRONT COVER

Attach the front cover to the engine main bearing cover.

Match the faucet joint. and tighten the bolts.

89 x 18mm bolt . .1 PCS.

80 spring washer . 4 pcs. Tightening torque 130 to 110 kg-m

NOTE: Make sure that the slits for cooling air are down.

10-3-Z ROTOR

1) Clean the tapered part of the engine output shaft and

Fig. 70-16

the female tapered part of the rotor shaft of oil and other forergn matter with waste cloth.

21 Install the rotor and tighten the through-bolt. (.See Ftg. 10-17.)

Tighten the through-bolt by strikmg a box spanner or socket wrench hard clockwise.

NOTE: The outside diameter and lamination thick- ness of the rotor is shown in 5-2-2 ROTOR under Paragraph 5-2 FUNCTIONS.

NOTE: The through-bolt is shaped as shown below.

Fig. lo-17

n

							I
Model		d				I	!	5
RGX180	:	8mm		’	222	mm	25	mm
	i	5..16	In.	’	8.74	in.	/ 0.98		in.
			-
RGX240	’	8 mm			230	mm	25	mm
RGX240D	I	5.‘16	in.	(	9.06	in.	0.98		In.
		Table		lo-	1

-47 -