Summit 3522a manual Boom Personnel Lift, Copyright Bil-Jax, Inc . All Rights Reserved

BOOM PERSONNEL LIFT

This equipment is designed and manufactured in compliance with the duties, responsibilities and standards set forth for manufacturers in the ANSI 92.2 standard at the time of manufacture.

This equipment will meet or exceed applicable OSHA and ANSI codes and standards when operated in accordance with sections 7, 8, 9 and 10 of ANSI A92.2 and all other manufacturer’s recommendations.

It is the responsibility of the user to follow all ANSI, OSHA, federal, state and local codes and regulations that govern the safe operation of this equipment.

Obtain, read and obey all safety precautions before performing maintenance or repairs or attempting to operate this equipment. This includes all manufacturer’s recommendations as well as those directives set forth by ANSI, OSHA, federal, state and local authorities.

To ensure proper and safe use of this equipment, it is strongly recommended that only trained and authorized personnel attempt to operate and maintain the boom lift.

This manual shall be considered a permanent and necessary component of the machine and shall be kept with the boom lift at all times.

Bil-Jax, Inc. is dedicated to the continuous improvement of this and all Bil-Jax products. Therefore, equipment information is subject to change without notice. Direct any questions or concerns regarding errors or discrepancies in this manual to the Bil-Jax Service Department.

Copyright © Bil-Jax, Inc. 2006. All Rights Reserved.

“Bil-Jax” is a registered trademark and “A Step Above” and “Summit Series” are trademarks of Bil-Jax, Inc. Contact Bil-Jax for replacement manuals.

First Printing: March 2006

125 Taylor Parkway

Archbold, Ohio 43502

Phone(800) 537-0540

(419) 445-8915

Fax (419) 445-0367

http://www.biljax.com