Summit 3522a manual Battery Maintenance

Models: 3522a

1 54
Download 54 pages 27.25 Kb
Page 8
Image 8

BIL-JAX 3522A

NEVER adjust, repair, replace or bypass any hydraulic or electrical control or safety device. These include, but are not limited to, hydraulic load control and flow control valves, solenoid valves and limit switches. Contact the Bil-Jax Service Department at 800-537-0540 if these components require maintenance.

NEVER attempt repairs or maintenance without first consulting manufacturer regarding proper procedures.

Battery Maintenance

Ensure the following general safety precautions are followed whenever performing battery maintenance on the Bil-Jax Model 3522A Articulating Boom Lift:

ALWAYS check battery acid level daily.

ALWAYS wear safety glasses when working with or near batteries.

ALWAYS avoid contact with battery acid. Battery acid causes serious burns and should be kept away from skin and eyes. If contact occurs, flush with water and consult a physician immediately.

ALWAYS disconnect ground cable first when removing battery.

ALWAYS connect ground cable last when installing battery.

ALWAYS charge batteries in open, well-ventilated areas.

NEVER smoke while servicing battery.

NEVER charge batteries near flammable materials. NEVER allow batteries to overcharge and boil.

NEVER short across battery posts to check for current. NEVER break a live circuit at the battery.

NEVER disconnect battery from charger while charger is connected to a live power source.

NEVER jumpstart other vehicles using boom lift battery.

6

Page 8
Image 8
Summit 3522a manual Battery Maintenance