BEFORE OPERATION
Ensure the following general safety precautions are followed before operating the
ALWAYS survey the usage area for potential hazards, such as untamped earth fills, unlevel surfaces, overhead obstructions and electrically charged conductors or wires. Maintain awareness of any potential hazards. ALWAYS watch for moving vehicles in the operating area.
ALWAYS read, understand and obey the procedures set forth in this manual before attempting to operate equipment.
ALWAYS inspect the equipment for damaged or worn parts. Check for cracked welds, hydraulic leaks, damaged wiring, loose wire connectors, damaged outriggers, low tire pressure, uneven tire wear or tire damage. Check for any improperly operating components. NEVER operate equipment if any damage is present or suspected. Damaged or malfunctioning equipment must be repaired before operation.
ALWAYS wear proper clothing. Wear protective equipment as required by federal, state and local regulations. Keep loose clothing, jewelry, gloves and hair away from moving parts.
ALWAYS wear a safety harness and lanyard.
ALWAYS locate, read and obey all directions and warnings displayed on the equipment.
ALWAYS inspect the equipment for DO NOT USE tags placed by previous operators or maintenance personnel. NEVER use equipment tagged in this way until all repairs are made and all
tags are removed by authorized personnel.
ALWAYS inspect the platform and the outrigger footpads for mud, grease, or other slippery material. ALWAYS remove any such material from the equipment to reduce the possibility of slippage.
NEVER allow improperly trained personnel to operate this equipment. Only trained and authorized personnel shall operate this equipment.
NEVER operate this equipment while under the influence of drugs or alcohol, while taking prescription medications, while feeling ill or prone to dizziness. Operators must be physically fit and thoroughly trained.
NEVER modify, alter or change the equipment in any way that would affect its original design or operation.
NEVER operate equipment in any way for which it is not intended.
DURING OPERATION
Ensure the following general safety precautions are followed during the operation of the
3522A Articulating Boom Lift:
ALWAYS position lift away from power sources to ensure that no part of the lift can accidentally reach into an unsafe area. This includes full extension of the boom through 700 degrees rotation.
DANGER
This machine is not insulated for use near electrical power lines and DOES NOT provide protection from contact with or close proximity to any electrically charged conductor. Operator must maintain safe clearances at all times (10 feet/3.05 meters minimum) and always allow for platform movement such as
Table
Voltage Range | Minimum Safe Approach Distance | ||
(Feet) | (Meters) | ||
(Phase to Phase) | |||
0 to 300V | Avoid Contact | ||
|
|
| |
Over 300V to 50KV | 10 | 3.05 | |
|
|
| |
Over 50KV to 200KV | 15 | 4.60 | |
|
|
| |
Over 200KV to 350KV | 20 | 6.10 | |
|
|
| |
Over 350KV to 500KV | 25 | 7.62 | |
|
|
| |
Over 500KV to 750KV | 35 | 10.67 | |
|
|
| |
Over 750KV to 1000KV | 45 | 13.72 | |
ALWAYS operate only on a firm and level surface. NEVER operate equipment on surfaces that do not support the equipment with its rated load capacity or on surfaces that do not support force exerted on the outriggers during boom extension and rotation.
ALWAYS keep personnel away from potential pinch or shear points.
ALWAYS report any misuse of equipment to the proper authorities.
ALWAYS maintain sure footing on the work platform. ALWAYS wear proper footgear. NEVER wear shoes with slippery or slick soles.
ALWAYS keep personnel and obstructions clear of the machine when repositioning basket.
ALWAYS cordon the area surrounding the outriggers to keep personnel and other equipment away from the machine while in use.
4
