Summit 3522a manual Combination Hitch Installation

BIL-JAX 3522A

COMBINATION HITCH

Observe the following procedure to change the hitch coupler on lifts equipped with an optional combination hitch:

Choose the desired hitch coupler from among the following: 2-inch ball hitch, 2 5/16-inch ball hitch, 2 ½-inch Pintle Ring, or Clevis hitch.

Insert the hitch coupler into the hitch bracket found at the end of the trailer tongue (Figure 8- 6).

Figure 8-6. Combination Hitch Installation

Choose the desired height for the hitch coupler and secure with the two included bolts.

Tighten the hex nuts to 150 lb-ft (200 N.m) torque.

Attach trailer to tow vehicle according to normal operating procedure.

CAUTION

Failure to verify correct torque when installing or reinstalling a coupler on the combination hitch bracket may cause the fasteners to shear and could result in damage to equipment.

48