18 Netra ft 1800 Installation Guide • February 1999
23-inch, 24-inch and 600mm Mountings
The 23-inch, 24-inch and 600mm mounting kits consist of the following items:
Refer to FIGURE2-7 on page 19 for 23-inch kits, FIGURE 2-8 on page 20 for 24-inch kits
and FIGURE2-9 on page 21 for 600mm kits.
The sides of the system chassis are provided with tapped screwholes asshown in
FIGURE2-2 on page 14.
Fit the front brackets using the screwholesin columns C and D, or just column C, or
just column D.
Screw the slide mounts to holes A and B in rows 1, 4, 7 and 10. Youcan then screw
the rear brackets to the rear of the rack (see FIGURE2-7,FIGURE 2-8 and FIGURE 2-9)
and slide the chassis onto the brackets until the front brackets are flush with the
front of the rack.
TABLE2-3 23-inch, 24-inch and 600mm Mounting Flange Kits
Partnumber
Quantity Item 23-inch 24-inch 600mm
1 Frontleft-hand mounting flange 340-4592 340-5445 340-5328
1 Frontright-hand mounting flange 340-4591 340-5446 340-5329
2 Rear topmounting flange 340-5449 340-5447 340-5331
2 Rear bottommounting flange 340-5450 340-5448 340-5427
8 Support rails 340-5330 340-5330 340-5330
6 Cable hook bracket with hooks already
installed 340-5553 340-5553 340-5553
40 M56mm panhead screws (for front and rear
flanges) N/A N/A N/A
16 M5 8mm countersunk screws(for support
rails) N/A N/A N/A