14 Netra ft 1800 Installation Guide • February 1999
The sides of the system chassis are provided with tapped screwholes asshown in
FIGURE2-2.
FIGURE2-2 Location Matrix For Mounting Flange Screws (19-inch rack)
The front flanges (see FIGURE2-6 on page 17) are screwed to holes in column C or
column D. Use column B only if the rear flanges are not going to be used.
The support rails (see FIGURE2-7 on page 19) are screwed to holes A and B in rows 1,
4, 7 and 10. The spacers provided must be used between the rails and the chassis to
prevent the rails being fouled by the rivets in the chassis metalwork.
Front of system Rear of system
ABC
D
1
2
3
4
5
6
7
8
9
10
Row numbers
Columns
Support rails
(340-5484)