10 SunStorageTek Enterprise PCI-X 4 Gb FC Single & Dual Port Emulex HBA Installation & Interop Guide • January 2007
Windows2000 and Windows Server 2003Operating System Requirements
This section contains information about using the single and dual port HBAs in
Windows2000 and Windows Server 2003 operating systems.

Minimum OS Levels

■Windows2000
■WindowsServer 2003
Note – Refer to your host platform documentation and the Emulex web site to
determine minimum Windows 2000 and WindowsServer 2003 versions required.
Known Issues and Bugs
The following HBA issues exist at this time.
■CR6266132. Booting from the Sun StorEdge 3500 family array fails with the single
and dual port HBAs in certain configurations.
Workaround:None; booting from a Sun StorEdge 3500 family array is not
supported at this time.
■CR 6350753. Packet timeout. (chip abort: sbp=600064a1e10 iotag=0. Completing.)
Workaround:None at this time. A fix is targeted for the Sun StorEdge SAN
Foundation Software release 4.4.10 for Sun Solaris OS 8 and 9 SPARC,patches
120222-10 (S10_SPARC),and 120223-10 (S10_x86).
■CR 6367185. Performing I/O operations on HBA ports 0 and 1 intermittently
stops when using Emulex 10k cards with the Sun StorEdge 3500 family arrays.
Workaround:None at this time. A fix is being investigated.
■CR 6313136. A Sun StorEdge 3510 FC Array 0x47 SCSI parity error occurs when
the Emulex HBA is connected to Sun StorEdge 3510 JBOD FC Array.
Workaround:None at this time. A fix is currently under investigation.