Sun Microsystems V490 manual Media door

Media door

4.Insert the system key into the system control switch and turn the system control switch to the Normal position.

See “System Control Switch” on page 15 for information about each system control switch setting.

Normal position

Power button

5.Press the Power button that is below the system control switch to power on the system.

Note – The system may take anywhere from 30 seconds (if firmware diagnostics do not run) to almost 30 minutes before video is displayed on the system monitor or the ok prompt appears on an attached terminal. This time depends on the system configuration (number of processors, memory modules, PCI cards) and the level of power-on self-test (POST) and OpenBoot Diagnostics tests being performed.

Chapter 7 Configuring Console Access 123