Sun Microsystems V490 manual Optional Select the tests you want to run

6.(Optional) Select the tests you want to run.

Certain tests are enabled by default, and you can choose to accept these.

Alternatively, you can enable and disable individual tests or blocks of tests by clicking the checkbox next to the test name or test category name. Tests are enabled when checked, and disabled when not checked.

TABLE 12-1lists tests that are especially useful to run on a Sun Fire V490 server.

TABLE 12-1Useful SunVTS Tests to Run on a Sun Fire V490 Server

SunVTS Tests	FRUs Exercised by Tests
cmttest, cputest, fputest, iutest,	CPU/Memory board, centerplane
l1dcachetest
indirectly: l2cachetest, l2sramtest,
mpconstest, mptest, systest
vmemtest, pmemtest, ramtest	Memory modules, CPU/Memory board,
	centerplane
disktest, qlctest	Disks, cables, FC-AL backplane
nettest, netlbtest	Network interface, network cable, centerplane
env5test, i2ctest	Power supplies, fan tray, LEDs, centerplane
sptest	Centerplane
ssptest	SC card
usbkbtest, disktest	USB devices, centerplane
dvdtest, cdtest	DVD device

Note – TABLE 12-1lists FRUs in order of the likelihood they caused the test to fail.

7.(Optional) Customize individual tests.

You can customize individual tests by right-clicking on the name of the test. For instance, in the illustration under Step 5, right-clicking on the text string ce0(nettest) brings up a menu that lets you configure this Ethernet test.

Chapter 12 Exercising the System 205