Sun Microsystems V490 manual How to Use Solaris System Information Commands

If you want to change RSC configuration, run the configuration script again as shown in Step 1 of this procedure.

For information about RSC configuration, user accounts, and alerts, see:

■Sun Remote System Controller (RSC) User’s Guide

This document is included on the Sun Fire V490 Documentation CD.

How to Use Solaris System Information Commands

This section explains how to run Solaris system information commands on a Sun Fire V490 server. To find out what these commands tell you, see “Solaris System Information Commands” on page 93, or see the appropriate man pages.

Before You Begin

The operating system must be up and running.

What to Do

1.Decide what kind of system information you want to display.

For more information, see “Solaris System Information Commands” on page 93.

2.Type the appropriate command at a console prompt. See TABLE 11-1.

TABLE 11-1Using Solaris Information Display Commands

Command	What It Displays	What to Type	Notes
prtconf	System configuration	/usr/sbin/prtconf	—
	information
prtdiag	Diagnostic and configuration	/usr/platform/sun4u/sb	Use the -voption for
	information	in/prtdiag	additional detail.

Chapter 11 Monitoring the System 197