28 Sun GigaSwift Ethernet Adapter Installation and User’s Guide • February 2003
2. Insert the Sun GigaSwift Ethernet Driver 1.0 Update 1 CD into the server ’sCD-ROM
drive.
The CD should automatically mount to the /cdrom/cdrom0 directory.If the CD did
not get mounted to this directory,refer to “Installing the Driver Software” on page 9
for mounting instructions.
3. Use the pkgadd -R command to install the three GigaSwift Ethernet software
packages to the diskless client’s root directory on the server.
Youwill need to install the SUNWced.u,SUNWcedm, and SUNWcedu software
packages to the client’s root directory.
4. Eject the Sun GigaSwift Ethernet Driver 1.0 Update 1 CD from the CD-ROM drive.
5. Create a hostname.cenumber file in the diskless client’s root directory.
Youwill need to create an /export/root/client_name/etc/hostname.cenumber
file for the GigaSwift Ethernet interface. See “Configuring the Network Host Files”
on page 25 for instructions.
6. Edit the hosts in the diskless client’s root directory.
Youwill need to edit the /export/root/client_name/etc/hosts file to include the
IP address of the GigaSwift Ethernet interface. See “Configuring the Network Host
Files” on page25 for instructions.
7. Be sure to set the MAC address on the server side and rebuild the device tree if
you want to boot from the GigaSwift Ethernet port.
8. To boot the diskless client from the GigaSwift Ethernet port, type the following
boot command:
#cd /cdrom/cdrom0/GigaSwiftEthernet/Packages
#pkgadd -R /export/root/client_name -d . SUNWced.u SUNWcem SUNWcedu
#cd /
ok boot path-to-device:link-param, -v