Parameter
adv-autoneg-cap
adv-1000fdx-cap
adv-1000hdx-cap
adv-100T4-cap
adv-100fdx-cap
TABLE 4-2
TABLE 4-2

TABLE 4-1ce Driver Parameter, Status, and Descriptions (Continued)

Parameter

Status

Description

 

 

 

red-dv4to6k

Read and write

red-dv6to8k

Read and write

red-dv8to10k

Read and write

red-dv10to12k

Read and write

tx-dma-weight

Read and write

rx-dma-weight

Read and write

infinite-burst

Read and write

disable-64bit

Read and write

Random early detection and packet drop vectors Random early detection and packet drop vectors Random early detection and packet drop vectors Random early detection and packet drop vectors PCI Interface parameter

PCI Interface parameter

PCI Interface parameter

PCI Interface parameter

Operational Mode Parameters

The following parameters determine the transmit and receive speed and duplex. describes the operational mode parameters and their default values.

Operational Mode Parameters

Description

Local interface capability advertised by the hardware 0 = Forced mode

1 = Autonegotiation (default)

Local interface capability advertised by the hardware

0= Not 1000 Mbit/sec full-duplex capable

1= 1000 Mbit/sec full-duplex capable (default)

Local interface capability advertised by the hardware

0= Not 1000 Mbit/sec half-duplex capable

1= 1000 Mbit/sec half-duplex capable (default)

Local interface capability advertised by the hardware 0 = Not 100T4 capable (default)

1 = 100T4 capable

Local interface capability advertised by the hardware

0= Not 100 Mbit/sec full-duplex capable

1= 100 Mbit/sec full-duplex capable (default)

Chapter 4 Configuring Driver Parameters 39

Page 61
Image 61
Sun Microsystems X1150A manual Operational Mode Parameters