Sun Microsystems X1150A manual Setting the Autonegotiation Mode

●To list all the parameters supported by the ce driver, type ndd /dev/ce. (See TABLE 4-1through TABLE 4-11for parameter descriptions.)

# ndd /dev/ce
name to get/set ? ?
?	(read only)
instance	(read and write)
adv_autoneg_cap	(read and write)
adv_1000fdx_cap	(read and write)
adv_1000hdx_cap	(read and write)
adv_100T4_cap	(read and write)
adv_100fdx_cap	(read and write)
adv_100hdx_cap	(read and write)
adv_10fdx_cap	(read and write)
adv_10hdx_cap	(read and write)
adv_asmpause_cap	(read and write)
adv_pause_cap	(read and write)
master_cfg_enable	(read and write)
master_cfg_value	(read and write)
use_int_xcvr	(read and write)
enable_ipg0	(read and write)
ipg0	(read and write)
ipg1	(read and write)
ipg2	(read and write)
rx_intr_pkts	(read and write)
rx_intr_time	(read and write)
red_dv4to6k	(read and write)
red_dv6to8k	(read and write)
red_dv8to10k	(read and write)
red_dv10to12k	(read and write)
tx_dma_weight	(read and write)
rx_dma_weight	(read and write)
infinite_burst	(read and write)
disable_64bit	(read and write)
name to get/set ?
#

Setting the Autonegotiation Mode

By default, autonegotiation is set to on. This means that the adapter communicates with its link partner to determine a compatible network speed, duplex mode, and flow control capability.

50 Sun GigaSwift Ethernet Adapter Installation and User’s Guide • February 2003