Sunbeam LC6200 Using your Sunbeam MultiProcessor continued, Locked, Using your MultiProcessor

Models: LC6200

1 44
Download 44 pages 38.72 Kb
Page 13
Image 13
Using your Sunbeam MultiProcessor continued

Using your Sunbeam MultiProcessor continued

5.To lock the processor cover into position, ready for use, turn the cover to the right. The holding lip should be flush with the top of the bowl handle, see Figure 5.

LOCKED

LC6200

 

 

Pictured

Fig 5

Important: If the processing bowl and cover are not correctly assembled, the MultiProcessor will not function.

Using your MultiProcessor

1.Plug the power cord into a 230-240V AC power outlet and turn the power ‘ON’.

2.Using the control dial, select the desired processing speed.

The Pulse function remains on as long as the Pulse button is pressed down.

The variable speed settings will provide continuous processing until the control dial is returned to the ‘0’ position.

Further ingredients can also be added whilst processing by pouring through the feed tube once the food pusher has been removed.

3.After you have completed processing, turn the control dial to the ‘0’ position.

Note: For maximum control when using your food processor, before turning on your food processor load the feed tube. Always use the food pusher for more evenly processed foods and never use your fingers.

Important: When mixing a heavy load, ie. ‘1.5kg Dough’ do not operate food processor for more than 1 minute at a time.

11

Page 13
Image 13
Sunbeam LC6200 manual Using your Sunbeam MultiProcessor continued, Locked, Using your MultiProcessor