Sunbeam LC6200 manual Blade storage compartment, Storing your Sunbeam MultiProcessor

Models: LC6200

1 44
Download 44 pages 38.72 Kb
Page 18
Image 18
Storing your Sunbeam MultiProcessor

Storing your Sunbeam MultiProcessor

The Sunbeam MultiProcessor was designed so that all attachments can be stored within the unit itself, see Figure 22.

3.Each of the blades is numbered 1 through 6 and corresponds with the numbered illustrations on the unit, see Figure 25. Blade 1 is the ‘Thin Slicing’ blade and it’s position in the blade storage compartment is the far left front position, see Figure 26.

Fig 22

LC6200

Pictured

 

Blade storage compartment

1.Your MultiProcessor is accessorised with 6 blades. Each of these blades are illustrated and numbered above the blade storage compartment, see Figure 23.

Fig 23

2.Pull down the blade storage door, see Figure 24.

blade storage door Blade storage compartmentManual backgroundManual background

Fig 24

Fig 26

4.Blade 2 is the ‘Thick Slicing’ blade and is positioned directly behind the thin slicing blade.

5.Blade 3 is the ‘Chipping’ blade and it’s position in the blade storage compartment is the middle front position, see Figure 27.

Fig 27

6.Blade 4 is the ‘Grating’ blade and is positioned directly behind the chipping blade.

Fig 25

16

Page 18
Image 18
Sunbeam LC6200 manual Blade storage compartment, Storing your Sunbeam MultiProcessor