Guide to the Instant Steam Function
The VitaSteam Electronic features an Instant Steam function that will enable steam to be generated in as little as 30 seconds. For this feature to operate you must place the removable drip tray with instant steam sleeve in position.
| MAX |
| MIN |
HR | MIN |
| SET |
The instant steam sleeve concentrates a small amount of water around the exposed heating element, quickly bringing it to boiling temperature to produce steam, rather than heating all of the water in the reservoir at once.
The instant steam sleeve has a small cut out in the bottom to allow water to flow into the contained water area.
For more efficient steaming we recommend that the appliance is always operated with the removable drip tray with instant steam sleeve in position.
Guide to Water Levels
Your VitaSteam Electronic relies on the water reservoir being full of water to operate. Fill the water reservoir with clean water only. See Figure 1. The water level must be between the ‘MIN’ (500ml) and ‘MAX’ (1000ml) markings.
When continuously cooking food with your Steamer ensure that the water level does not fall below the ‘MIN’ marking (500ml).
when cooking for long periods and allows for continuous steaming. See Figure 2.
If this does occur your VitaSteam Electronic is fitted with an automatic boil dry sensor which will switch off the heating element. See previous page for more details.
The external water fill holes on both sides of the Steamer allow you to add water to the Steamer without removing the steaming trays. This is ideal for topping up water levels
| MAX |
| MIN |
HR | MIN |
Figure 1
Figure 2
HR 
MAX
MIN
MIN
7
