RENEWAL PARTS
Contact your local York® Parts Distribution Center for authorized replacement parts.
APPROVALS
Design certified by CSA as follows:
•For use as a cooling unit only with or without optional electric heat.
•For use as a forced air furnace with cooling unit
•For outdoor installation only.
•For installation on combustible material.
•For use with natural gas or propane gas.
THIS PRODUCT MUST BE INSTALLED IN STRICT COMPLIANCE WITH THE ENCLOSED INSTALLATION INSTRUC- TIONS AND ANY APPLICABLE LOCAL, STATE, AND NATIONAL CODES INCLUD- ING, BUT NOT LIMITED TO, BUILDING, ELECTRICAL, AND MECHANICAL CODES.
IMPROPER INSTALLATION MAY CREATE A CONDITION WHERE THE OPERATION OF THE PRODUCT COULD CAUSE PERSONAL INJURY OR PROPERTY DAMAGE.
The installer should pay particular attention to the words: NOTE, CAUTION and WARNING. Notes are intended to clarify or make the installation easier. Cau- tions are given to prevent equipment damage. Warn- ings are given to alert installer that personal injury and/ or equipment damage may result if installation proce- dure is not handled properly.
Johnson Controls Unitary Products | 5 |
