SUPER MICRO Computer 5015M-NTR, 5015M-UR Accessing the Drive Bays, 3. Removing the Front Bezel

Chapter 6: Advanced Chassis Setup

Figure 6-3. Removing the Front Bezel

1. Unlock

2. Press release knob

3. Remove bezel assembly

Accessing the Drive Bays

SATA Drives: Because of their hotswap capability, you do not need to access the inside of the chassis or power down the system to install or replace SATA drives. Proceed to the next section for instructions.

DVD-ROM/Floppy Disk Drives: For installing/removing a DVD-ROM or fl oppy disk drive, you will need to gain access to the inside of the 5015M-UR/5015M-U/5015M- NTR/5015M-NT by removing the top cover of the chassis. Proceed to the "DVD- ROM and Floppy Drive Installation" section later in this chapter for instructions.

Note: Only "slim" DVD-ROM and fl oppy drives will fi t into the 5015M-UR/5015M- U/5015M-NTR/5015M-NT.

6-5