Chapter 7: BIOS
Slot1 PCI-Exp. x8, Slot2 PCI-Exp. x8 and Slot3 PCI-Exp. x4
Access the submenu for each of the settings above to make changes to the following:
Option ROM Scan
When enabled, this setting will initialize the device expansion ROM. The options are Enabled and Disabled.
Enable Master
This setting allows you to enable the selected device as the PCI bus master. The options are Enabled and Disabled.
Latency Timer
This setting allows you to set the clock rate for Bus Master. A
Large Disk Access Mode
This setting determines how large hard drives are to be accessed. The options are DOS or Other (for Unix, Novelle NetWare and other operating systems).
Advanced Chipset Control
Access the submenu to make changes to the following settings.
! |
Warning: Use caution when changing the Advanced settings. Incorrect values entered may cause system malfunction. Also, a very high DRAM frequency or incorrect DRAM timing may cause system instability. When this occurs, revert to the default setting.
Clock Spectrum Feature
If Enabled, the BIOS will monitor the level of Electromagnetic Interference caused by the components and will attempt to decrease the interference whenever needed. The options are Enabled and Disabled.
ECC Conditions (Available when supported by the memory)
This setting specifi es ECC Error conditions that will be treated as ECC Error Events. The options are None, Single Bit, Multiple Bit, and Both.
ECC Error Handler (Available when supported by the memory)
This setting allows you to select the type of interrupt to be activated when an ECC error occurs. The options are None, NMI
