SUPER MICRO Computer 5015M-NT Serverboard Features, Processors, Memory, UIO 5015M-UR, Serial ATA

SUPERSERVER 5015M-UR/5015M-U/5015M-NTR/5015M-NT User's Manual

SuperServer 5015M-UR/5015M-U/5015M-NTR/5015M-NT User's Manual

Note: a "V" at the end of the server name indicates the chassis is silver, "B" indicates

black.

1-2 Serverboard Features

At the heart of the SuperServer 5015M-UR/5015M-U/5015M-NTR/5015M-NT lies the PDSMU, a single processor serverboard based on Intel's 3010 chipset. Below are the main features of the PDSMU (see Figure 1-1 for a block diagram of the chipset).

Processors

The PDSMU supports a single 775-pin Intel® Xeon® 3000 Series, Pentium® D, Pentium Extreme Edition, Pentium 4, and Celeron D processors at a FSB speed of 1066/667/533 MHz. Please refer to the serverboard description pages on our web site for a complete listing of supported processors.

Memory

The PDSMU has four 240-pin DIMM sockets that can support up to 8 GB of un- buffered ECC/non-ECC DDR2-667/533/400 SDRAM. Memory may be installed in either interleaved or non-interleaved confi gurations. Please refer to Chapter 5 for details.

UIO (5015M-UR)

The PDSMU is a specially-designed serverboard that features Supermicro's UIO (Universal I/O) technology. UIO serverboards have a PCI-Express x8 connector that can support any one of several types of UIO card types to add SAS ports, additional LAN ports, etc. to the serverboard. This allows the user to tailor the serverboard to their own needs. Note: the 5015M-UR does not come with a UIO card installed.

Serial ATA

An on-chip (ICH7R) SATA controller is integrated into the PDSMU to provide a four-port, 3 Gb/sec Serial ATA subsystem, which is RAID 0, 1, 5 and 10 supported. The SATA drives are hot-swappable units. Note: The operating system you use

1-2