SUPER MICRO Computer 6015B-3, 6015B-T user manual Connector Definitions

SUPERSERVER 6015B-3/6015B-T User's Manual

5-8 Connector Definitions

ATX Power 20-pin Connector

Pin Definitions (JPW1)

ATX Power Connector

The primary ATX power supply con- nector meets the SSI (Superset ATX) 20-pin specification. Make sure that the orientation of the connector is correct. See the table on the right for pin definitions.

Auxiliary Power Connector

Pin# Definition

11GND8

12+5V1

13+5V2

143.3V1

153.3V2

16+5V/SB

17+12V4

18+12V5

19+12V6

20Blcoked

Pin # Definition

1GND1

2GND2

3GND3

4GND4

5GND5

6GND6

7GND7

8+12V1

9+12V2

10+12V3

In addition to the Primary ATX power connector (above), the Auxiliary 4-pin connector at JPW2 must also be con- nected to your power supply. See the table on the right for pin definitions.

Processor Power Connector

JPW3 must also be connected to the power supply to provide power for the processor(s). See the table on the right for pin definitions.

NMI Button

The non-maskable interrupt button header is located on pins 19 and 20 of JF1. Refer to the table on the right for pin definitions.

Power LED

The Power LED connection is located on pins 15 and 16 of JF1. Refer to the table on the right for pin definitions.

+12V 4-pin Aux. Power Pin Definitions (JPW2)

Pins	Definition
1 & 2	Ground
3 & 4	+12V

Processor Power

Pin Definitions (JPW3)

Pins	Definition
1 through 4	Ground
5 through 8	+12V

NMI Button

Pin Definitions (JF1)

Pin# Definition

19Control

20Ground

Power LED

Pin Definitions (JF1)

Pin# Definition

15Vcc

16Control

5-12