SUPERSERVER
Power Fail LED
The Power Fail LED connection is located on pins 5 and 6 of JF1. Re- fer to the table on the right for pin definitions.
Power Fail LED
Pin Definitions (JF1)
Pin# Definition
5Vcc
6Ground
Reset Button
The Reset Button connection is lo- cated on pins 3 and 4 of JF1. Attach it to the hardware reset switch on the computer case. Refer to the table on the right for pin definitions.
Power Button
The Power Button connection is located on pins 1 and 2 of JF1. Mo- mentarily contacting both pins will power on/off the system. This button can also be configured to function as a suspend button (see the Power Button Mode setting in BIOS). To turn off the power when set to suspend mode, depress the button for at least 4 seconds. Refer to the table on the right for pin definitions.
Reset Button
Pin Definitions (JF1)
Pin# Definition
3Reset
4Ground
Power Button
Pin Definitions (JF1)
Pin# Definition
1PW_ON
2Ground
Universal Serial Bus (USB0/1)
Universal Serial Bus
Pin Definitions (USB0/1)
Two Universal Serial Bus ports are located on the IO backplane. USB0 is the bottom connector and USB1 is the top connector. See the table on the right for pin definitions.
USB0
Pin # Definition
1+5V
2PO-
3PO+
4Ground
5N/A
USB1
Pin # Definition
1+5V
2PO-
3PO+
4Ground
5Key
