SUPERSERVER 6015B-3/6015B-T User's Manual

SAS/SATA Subsystem

The SC815TQ-560 chassis was designed to support four SAS (6015B-3) or SATA (6015B-T) hard drives, which are hot-swappable units. Note: The operating system you use must have RAID support to enable the hot-swap capability of the SAS/SATA drives.

PCI Expansion Slots

One standard size and one low-profile PCI-X/PCI-E add-on card may be used with the SC815TQ-560 chassis. See section 5-6 for details.

Front Control Panel

The SC815TQ-560's control panel provides you with system monitoring and control. LEDs indicate system power, HDD activity, network activity (2) and overheat/fan failure. A main power button and system reset button is also included.

I/O Backplane

The SC815TQ-560 is an extended ATX form factor chassis that is designed to be used in a 1U rackmount configuration. Ports on the I/O backplane include one COM port, a VGA port, two USB 2.0 ports, PS/2 mouse and keyboard ports and two gigabit Ethernet ports.

Cooling System

The SC815TQ-560 chassis has an innovative cooling design that features four sets of 40-mm counter-rotating fans located in the middle section of the chassis. There is a "Fan Speed Control Mode" setting in BIOS that allows chassis fan speed to be determined by system temperature. The power supply module also includes a cooling fan.

1-4

Page 14
Image 14
SUPER MICRO Computer 6015B-3, 6015B-T user manual SAS/SATA Subsystem, Front Control Panel, Backplane, Cooling System