SUPER MICRO Computer 6015B-T, 6015B-3 user manual Preface, About This Manual, Manual Organization

Preface

Preface

About This Manual

This manual is written for professional system integrators and PC technicians. It provides information for the installation and use of the SuperServer 6015B-3/6015B-

T.Installation and maintenance should be performed by experienced technicians only.

The SuperServer 6015B-3/6015B-T is a high-end server based on the SC815TQ-560 1U rackmount chassis and the Super X7DBR-3/X7DBR-E, a dual processor serverboard that supports Intel® Xeon® 5400/5300/5200/5100/5000 series proces- sors at a Front Side (System) Bus speed of 1333/1066/667 MHz and up to 32 GB of ECC FBD DDR2-667533 SDRAM.

Manual Organization

Chapter 1: Introduction

The first chapter provides a checklist of the main components included with the server system and describes the main features of the X7DBR-3/X7DBR-E serverboard and the SC815TQ-560 chassis, which comprise the SuperServer 6015B-3/6015B-T.

Chapter 2: Server Installation

This chapter describes the steps necessary to install the SuperServer 6015B- 3/6015B-T into a rack and check out the server configuration prior to powering up the system. If your server was ordered without processor and memory com- ponents, this chapter will refer you to the appropriate sections of the manual for their installation.

Chapter 3: System Interface

Refer here for details on the system interface, which includes the functions and information provided by the control panel on the chassis as well as other LEDs located throughout the system.

iii