Appendix D: Adaptec HostRAID Setup

Adding a Bootable Array

To make an array bootable:

1.From the Main menu, select Manage Arrays.

2.From the List of Arrays, select the array you want to make bootable, and press <Ctrl> and <B>.

3.Enter Y to create a bootable array when the following message is displayed: "This will make all other existing bootable array non-bootable. Do you want to make this array bootable? (Yes/No):" Then, a bootable array will be created. An asterisk (*) will appear next to the bootable array (as shown in the picture below:)

Deleting a Bootable Array

1.From the Main menu, select Manage Arrays.

2.From the List of Arrays, select the bootable array you want to delete, and press <Ctrl> and <B>. Note: a bootable array is the array marked with an asterisk * (as shown in the picture above.)

3.When the following message is displayed: "The array is already marked bootable. Do you want to make this array as not bootable? (Yes/No)," Enter Y to delete a bootable array. The bootable array will be deleted and the asterisk will disap- pear.

Note: Do not use the delete key to delete the bootable array.

D-11

Page 127
Image 127
SUPER MICRO Computer 6015B-T, 6015B-3 Adding a Bootable Array To make an array bootable, Deleting a Bootable Array