Chapter 2: Installation
Onboard Power LED
An Onboard Power LED is located at LE1 on the motherboard. When LE1 is on, the AC power cable is connected. Make sure to disconnect the power cable before removing or installing any component. See the layout below for the LED location.
BMC Heartbeat LED
ABMC (Baseboard Management Con- troller) Heartbeat LED is located at DP1. When DP1 blinks, the BMC functions properly. Refer to the table on the right for details. Also see the layout below for the LED location.
Onboard PWR LED Indicator
LED Settings
LED Color |
| Definition |
Off |
| System Off |
| ||
On |
| System on, or |
| ||
|
| System off and PWR |
|
| Cable Connected |
|
|
|
BMC Heartbeat LED Indicator (DP1)
LED Settings
Green: Blinking BMC is ready for use
A. Onboard PWR LED
B. BMC Heartbeat LED
NIC4 LED
A |
B
JBMC1
LSI 1068E
