Suunto D6I manual Transmitter battery kit, Required tools

CAUTION	Defects caused by improper battery installation are not covered
	by the warranty.

9.1.1. Transmitter battery kit

The transmitter battery kit includes a 3.0 V CR ½ AA lithium cell battery and a lubricated O-ring. When handling the battery, do not make contact with both of the poles at the same time. Do not touch the metal surfaces of the battery with your bare fingers.

9.1.2. Required tools

•A Phillips-head screwdriver

•Soft cloth for cleaning

9.1.3.Replacing the transmitter battery To change the transmitter battery:

1.Remove the transmitter from the regulator HP port.

2.Unscrew and remove the four Phillips screws on the back of the transmitter.

3.Pull off the transmitter cover.

4.Carefully remove the O-ring. Be careful not to damage the sealing surfaces.

5.Carefully remove the battery. Do not touch the electrical contacts or the circuit board.

Check for any traces of leakage, or for any other damage. If there is a leak or any other damage, take the transmitter to an authorized Suunto representative or distributor for checking and repair.

107