Alarm is activated | Suunto D6I instruction

Alarm type

Alarm reason

Low priority alarm, sounded two times. The OLF% value blinks if the PO2 value is greater than 0.5 bar.

Low priority alarm, sounded two times. The Maximum depth value blinks.

Low priority alarm, sounded two times. The Dive time value blinks.

The OLF value reaches the fixed 80% or 100%. In the DIVE Nitrox mode only. You can acknowledge the alarm.

The selected depth (3–120 m / 10–394 ft) is exceeded. The fixed maximum depth (120 m / 394 ft) is exceeded. You can acknowledge the alarm.

The selected dive time (1–999 min) is exceeded. You can acknowledge the alarm.

Low priority alarm, sounded once. The Maximum depth value blinks.

Indicates reaching a certain depth. In the DIVE Free mode only. You can acknowledge the alarm.

Low priority alarm, sounded once. The Surface time value blinks.

Indicates the length of the surface time before a new dive. In the DIVE Free mode only. You can acknow- ledge the alarm.

NOTE	When the backlight is turned OFF, it does not illuminate when an
	alarm is activated.
42

Image 41

Suunto D6I manual Alarm is activated

Contents

Suunto D6i Getting Started Page Diving Care and Maintenance of MY Suunto Diving Computer Intellectual Property Welcome to the World of Suunto Dive Computers To commit errors that may lead to serious injury or death Page Pression sickness Al, and Safety/Deep Stop are correctRow USE BACK-UP INSTRUMENTS! Ensure that you use back-up Information and must be avoided Recommendations given by Divers Alert Network DANSion illness Do not Expose the Suunto D6is Optional Tank More conservative calculations, use the personal adjustmentDeath Planning information Properly Neous dive and planning data Series, you should set the instrument in Nitrox mode Trox mode even during the no-fly timeGauge mode the no-fly time is always 48 hours Modify the gas mix accordingly Suunto User Interface Returns to the Time mode automatically Navigating in the menus Compass Symbol Button Press Main functions Button symbols and functions Down Getting Started Time mode settings Setting the alarm Setting the dual time Setting the time Setting the units Setting the date Setting the contrast Setting the backlight Stopwatch Setting the tones AC water contacts Cleaning it and/or drying it with a soft towel Activates in the Time mode, the AC symbol will appear onLearning how to use your compass Contact to activate automatically. This can happen, for ex Compass display Displays by pressing the UP/DOWN buttons Locking a bearing Symbol Explanation Calibration Compass settingsPage Declination Time-out Suunto Rgbm Before DivingRisks include possible serious injury or death Emergency ascents Nitrox Dive computer limitations That may lead to serious injury or death Audible and visual alarmsFreediving Instructional beep Sound pattern Interpretation Alarm type Sound pattern Duration Audible and visual alarm types Alarm type Alarm type Alarm is activated Omitted decompression Error conditions Installing the wireless transmitter Wireless transmission Group uses the same code as you Pairing and code selectionFirst use. You do not need to redo the pairing unless you Diving Be cleared first Order to save battery energy, the transmitter enters powerSure remains unchanged for more than five 5 minutes. Pressure change is measured Display Indication Transmitting data Gauge mode Free mode Dive mode settingsSetting AIR mode Free mode Elapsed after the dive Some settings cannot be changed until five 5 minutes hasSetting the nitrox values Page This gas before you have ascended above this depth Setting the personal/altitude adjustments Setting the tank pressure alarm Setting the tank pressure pairing Setting the depth notify alarm Free mode Setting the depth alarm With a range of 1-999 minutes, the alarm can be set to your Setting the dive-time alarmSetting the surface time notify alarm Free mode Planned bottom time, for example Setting the deep stops Setting the sample rate Activation and pre-checks Dive mode activation Accessing Dive modePage Diving at altitude Battery power indication Least three 3 hours before diving Alt. adjustment value Altitude rangeHow the Altitude value is set Personal adjustments Personal ad Condition Desired tables Surface intervals and dives Safety StopsRecommended Safety Stops Mandatory Safety Stops During Descent Deep stops Be activated at the end of the dive Diving Diving in the AIR mode Dive Air Basic dive data Bookmark Tank pressure data Low Air Pressure Warnings Normal Ascent Rate Activated BACKLIGHT, Alarm Ascent rate indicator Decompression dives Stopwatch Timer Ceiling, ceiling zone, floor and decompression range Page Display below the floor Display at the ceiling zone Display above the floor Display above the ceiling Diving in the Nitrox mode Dive Nitrox Default settings Before diving in the Nitrox mode Oxygen displays Oxygen limit fraction OLF% Current time Water temperature Dive time Gas change and multiple breathing gas mixes Diving in the Gauge mode Dive Gauge Day History Free dive time limit will activate after 10 minutes Start a new oneFree dive time limit Surface interval Alarms Symbol on displayAfter Diving Dive numbering Flying after diving Free DiveRepetitive dive planning Dive Planning mode Plan NoDec Page It does not affect the calculations in Plan NoDec mode Error mode see .7. Error conditionsMemory mode Dive numbering shown during dive planning Dive logbook MEM Logbook I, main display Maximum depth Date of dive Dive history MEM History To the instructionsTion 7.2. Dive numbering for further information Free Dive History Face unit and the downloadable Suunto DM4 software Suunto DM4 with Movescount Movescount Page Water Contacts and Push Buttons Care and Maintenance of MY Suunto Diving COM- PuterPage Maintenance By warranty FAQsOriginal battery replacement and strap kits must be used HOW do I Know if MY Suunto Product is Covered by WARRANTY? Wireless transmitter battery replacement Battery Replacement Required tools Transmitter battery kit Installing the transmitter battery Page Temperature display Technical DataTransmitter Depth gauge Calendar clock Displays only in Nitrox modeLogbook/dive profile memory Operating conditions Battery Tissue calculation model Rgbm Suunto Rgbm adaptive decompression Diver Attention Symbol Advice to Extend Surface Interval No-decompression limits for air No-decompression time limits for various depths ft Altitude diving Oxygen exposure Patent notice Intellectual PropertyCopyright Trademark 12.2. CE DisclaimersUser’s responsibility Page Exclusions and Limitations Warranty Period Access to Suunto warranty service Limitation of Liability Other important notices 125 Disposal of the Device DAN DCI DM4 Glossary 128 129 PFO PO2 Rgbm Global +358 2 284 USA toll free Canada toll free Suunto Help Desk