Suunto D6I manual Diving in the AIR mode Dive Air

6. DIVING

This section contains instructions on how to operate the dive computer and interpret its displays. The dive computer is easy to use and read. Each display shows only the data relevant to that specific diving mode.

6.1. Diving in the AIR mode (DIVE Air)

This section contains information on diving with standard air. To activate the DIVE Air mode, please refer to Section 5.10.1. Accessing DIVE mode.

DIVE HAS JUST BEGUN AND

AVAILABLE NO-DECOMPRESSION

TIME IS OVER 99 MINUTES SO NO

VALUE IS DISPLAYED.

NOTE

NOTE

The dive computer will remain in the SURFACE mode at depths less than 1.2 m/4 ft. At depths greater than 1.2 m/4 ft the instru- ment will go into the DIVE mode automatically. However, it is re- commended that you activate the SURFACE mode manually before entering the water in order to perform the necessary dive pre-checks.

The default fields shown on your dive computer in the DIVE mode are the ones you select while in the SURFACE mode.

69