Suunto D6I manual Error mode see .7. Error conditions, Dive numbering shown during dive planning

NOTE	The DIVE PLANNING mode is disabled in GAUGE mode and in
	Error mode (see Section 5.7. Error conditions).
	The DIVE PLANNING mode calculates no-decompression times
	for Mix1 only. If an additional mix is enabled in the Nitrox mode,
	it does not affect the calculations in (PLAN NoDec) mode.

Higher Altitude and conservative Personal Adjustment settings will shorten the no- decompression time limits. These limits at different Altitude and Personal Adjustment setting selections are explained in Section 5.10.4. Diving at altitude and in Sec- tion 5.10.5. Personal adjustments.

7.5.1. Dive numbering shown during dive planning

Dives belong to the same repetitive dive series if the instrument was still counting down the no-fly time at the beginning of the dive.

The surface interval must be at least five (5) minutes for a dive to be considered a repetitive dive. Otherwise, it is considered a continuation of the same dive. The dive number will not change and the dive time will continue where it left off. (Refer also to Section 7.2. Dive numbering ).

7.6. MEMORY mode

The memory options in the MEMORY mode include dive logbook (MEM Logbook) and dive history (MEM History). They are accessed from the DIVE mode and you can toggle between them by using the UP/DOWN buttons.

93