Note: Only one race can be stored in the memory. As soon as the count down function is restarted, the information from the previous race will be erased from the memory.
CHAPTER 3 CHRONOGRAPH MODE (REGATTA)
The chronograph mode is able to:
•measure and store
•obtain a maximum range of one run (timing event) up to 23 hours 59 minutes and 59.9 seconds. Upon exceeding this range the Regatta will activate an audible sound to indicate the maximum range has been reached and the timing process has stopped.
To view Chronograph mode:
Check the Mode Indicator Bar. If the mode arrow is not on CHR, PRESS the [Mode] button until the arrow is directly below CHR on the bar.
In the Chronograph mode (Fig. 7):
•Field 1 displays the seconds and tenths of seconds of the timer.
•Field 2 displays the timer showing the hours and minutes.
•Field 3 displays the current time and to the right the text “Stopwatch”.
Note: If the stopwatch function is on and the user is in another mode other than the main chronograph mode, the text “Stopwatch” flashes to remind the user this function is activated.
3.1 HOW TO USE THE CHRONOGRAPH
In the chronograph mode:
1.PRESS the [+] button to start the stopwatch.
2.PRESS the
In Field 1 the lap time is shown for the latest lap shown in Field 3 “L #” (# = lap number) (Fig. 8). The lap time is displayed for five seconds before the measured split time is displayed.
13
