a full hundred mbar or over a full inHg. When using the difference measurement function of the barometer, the segments indicate the change in atmospheric pressure either to the right if the pressure has risen or to the left if the pressure has dropped.
In the main Compass mode, the segments indicate the North, i.e. the one segment indicates North and the three segments point South. If you have set the compass to track a certain bearing, the segments on the circumference indicate the difference between the direction in which you want to go and your actual bearing.
7.1.4Why do the segments on the circumference go to the left (counterclockwise)?
Normally, they always go to the right (clockwise) from the
You are in the difference measurement mode and your unit is showing a decreasing value. In normal mode, the segment display increases clockwise, but if you are in a mode that shows you differences, all decreasing values go counterclockwise from the center position, and all increasing values go clockwise. So, it is “minus” to the left (counterclockwise), and “plus” to the right (clockwise).
7.1.5Why is there a symbol above the Mode Indicator Bar and what does it mean?
The symbol indicates that one, two, or three daily alarms are activated.
7.2 TIME
7.2.1Why do the segments on the circumference increase and decrease when I am in the Time mode?
The main function of the segments is related to the Compass mode, where a division into 36 segments is necessary due to the
32
