Suunto MARINER | REGATTA | YACHTSMAN SEA Level Pressure SUB Mode, Setting the Sea Level Pressure

To view the information compiled in the 4-day memory:

•PRESS the [-] button to scroll back down in increments of one hour for the first six hours, after that increments are 6 hours.

•PRESS the [+] button to scroll back up.

Note: Replacing the battery will not erase this information.

5.3 SEA LEVEL PRESSURE SUB MODE

Sea level pressure is pressure relative to sea level where as the pressure read in the main barometric display is absolute pressure in the current location.

In the Barometer mode, PRESS the [Select] button three times to enter this sub mode. In the sea level pressure sub mode (Fig. 30):

•Field 1 displays the text “SEA”;

•Field 2 displays the current sea level pressure; and

•Field 3 displays the current time.

5.3.1 Setting the Sea Level Pressure

To set the sea level pressure you have two choices either give the current sea level pressure or give the exact altitude of the location (e.g. lake).

1.PRESS the [Select] button and hold in for 2 seconds. Located in Field 2, the current sea level pressure will begin to flash.

2.PRESS the [+] button to scroll the pressure upward or PRESS the [-] button to scroll the pressure downward.

3.At the desired pressure, PRESS the [Mode] button to accept the changes and return to the main mode or if you want use altitude to set the sea level pressure, PRESS the [Select] button. Located in the field 2 the current reference altitude will begin to flash.

4.PRESS the [+] button to scroll the altitude upward or PRESS the [-] button to scroll the altitude downward.

26