SETUP - REVERB MENU
REVERB - SETUP MENU
1.Press the SETUP button.
2.Use the SCREEN RIGHT button to access the second page of the setup menu options.
3.Press the ENTER button to access the Reverb menu.
4.Use the CURSOR button to access the following options:
REVERB
Reverb simulates the effect of playing in a big room or hall where the sound reverberates off the walls and ceiling.
Pressing the REVERB button will toggle this effect on or off. When reverb is engaged the indicator light will be lit.
The reverb effect is engaged automatically when the power is turned on.
To select a type of reverb and to adjust the reverb levels use the Reverb setup menu.
Reverb Setting
Reverb | UPPER | LAYER | LOWER |
|
|
|
|
Room 3 | 100 | 100 | 100 |
|
|
|
|
Use the VALUE + and - buttons to select a reverb type or to adjust the Reverb Depth from the list below.
Reverb Depth (amount of Reverb) range is from 0 to 127.
UPPER - When reverb upper is turned on the Upper Sound Channel Voice notes will reverberate.
Use the VALUE +and - buttons to select a reverb level from
LAYER - When reverb layer is turned on the layer Sound Channel Voice notes will reverberate.
Use the VALUE + and - buttons to select a reverb level from
LOWER - When reverb lower is turned on the lower Sound Channel voice notes will reverberate.
Use the VALUE + and - buttons to select a reverb level from
REVERB TYPES
Room 1 is dense reverb with short decay. Room 2 is sparse reverb with short decay. Room 3 is sparse reverb with medium decay.
Hall 1 is reverb with clear reverberation and medium decay.
Hall 2 is reverb with rich reverberation and greater late reflections. Plate is a delay type.
Delay is stereo delay that produces two delay sound, left and right. Panning emphasizes the stereo location of the processor delay, the effect will be spaced at 30 degrees from the center.
57
